|
It is crucial that the surface you are planning on applying vinyl to is cleaned and prepared before the application:
- remove all the dirt and grime using a detergent solution and water
- remove any grease, oil or wax by scrubbing the surface with a solvent wipe i.e. isopropyl alcohol. Test the solvent on the substrate to check for any
potential damage.
- after cleaning wipe the substrate with a mild solvent using a clean rag
- finally perform a dry wipe of the substrate with a soft, lint free cloth before the solvent evaporates.
Cautionary Note: While it may seem logical that a strong solvent will be the
best cleaner for surfaces that are hard to stick film to - in the case of many
plastics and paints this is wrong and can lead to premature sign failing due to
embrittlement, cracking or loss of gloss. Use the mildest solvents possible and
only clean until the surface dirt is gone.
Unsuitable cleaning solutions include:
- Mineral Turpentine
- Citrus based cleaners
- Abrasive detergents
- Windex
Contact Us to discuss your signage requirements.
Return to the Vinyl Information Page.
|