Traditional / Flexface Lightboxes |
|
|
|
|
|
|
Traditional
These are standard lightboxes that you see under-awnings and mounted to walls.
The Blueprint Concept’s traditional lightboxes have the following characteristics -
*accurate placement of the struts to enhance the structural integrity of the box (eliminates the tendency of sagging between dropper tubes)
*the bracing of the struts top & bottom (eliminating twist)
*Staggered struts to minimise shadows when illuminated (either side of fluorescent tubes & therefore less noticeable)
*finish of the end product (powder coating is durable, economical & of a high standard compared with 2pac-high cost & acrylic-lifespan)
*High adaptability to accept numerous graphic mediums ( prints, vinyl, cut out letters, neon, moulded faces, fabricated faces)
Extrusions are generally 150mm deep.
|
|
 |
Flexface
Flexface ligthboxes are those whereby the vinyl print is stretched at both ends of the lightbox and tightened using a tensioning mechanism. These types of lightboxes are generally used in bigger applications as prints in normal lightboxes tend to sag in the middle when the size of the box is too large. The extrusions on this range from 150mm to 200mm deep.
Our in-house designers can work closely with you and your building to make sure the signs match the look and feel of the property. You can help us by choosing a colour from our Colour Guide.
Contact us to discuss your requirements.
Return to light boxes main page.
Ultra-Slim Light boxes information page.